Winged Slat
–-Winged slats provide increased privacy over most other slats.
These self-locking double-wall fence slats (no locking channels needed) combine the proven quality and durability of our standard slats with unique “wings” for extra screening and security. These wings are serrated to help with ease of installation and to add locking power while also providing increased privacy to your chain link fence. This uniquely styled, patented winged slat can be purchased by the bag or pre-inserted into the chain link mesh during the production process at our factory. If you or a client wants a privacy fence, these chain link winged slats are the way to go because of their self-locking wings and increased security. Plus, if you buy them pre-inserted, the chain link fence is all you have to install. It doesn’t get easier or quicker than that and will save you time and money on the cost of labor.
GENERAL FEATURES AND SPECIFICATIONS:

Design – Includes a rigid, flat tubular body with inside “legs” for extra support. These flexible and resilient wing portions are positioned on each side of the slat body. Serrations are added to the wings for easier installation and locking power.
Installation – Insert the slats vertically into the fence from top to bottom. No tools are necessary. The serrated wings grip the knuckles of the wire mesh securing the slat in place. (no locking channels needed)
Standard Chain Link Fence Heights – 4 ft., 5 ft., 6 ft., 7 ft., and 8 ft. For heights exceeding 7 feet, we recommend using (2) two half sizes (i.e. for 10-foot fence use two 5 foot slats) (Special heights available upon request)
Slat Length – 2” shorter than the standard chain link fence height
Wind Load and Privacy Factor – Approximately 90% (Based on wire/mesh used-stretch tension)

SLAT COLORS

These color swatches are only approximations. Please refer to actual color samples for final matching.
This slat with its special wings provides more privacy than any other slat.
–Each Ultimate Slat has four unique “wings” that fit tightly in the chain link mesh and provide near-total privacy. This top-locking, double-wall slat offers the same proven quality and durability of our standard slats and provides extra screening and security. They truly are the ultimate choice in chain link fence privacy slats.
GENERAL FEATURES AND SPECIFICATIONS:

Design – Includes a rigid, flat tubular body with inside legs for extra support. These flexible and resilient four wing portions are positioned two on each side of the slat body. There are no serrations thereby giving a more beautiful, aesthetic look.
Installation – Easy “3-step” process:
- Step 1: Insert the patented locking strip horizontally into the top section of the 2nd diamond
down from the top. - Step 2: Insert the slats vertically until the patented notch snaps itself into the locking strip.
- Step 3: Go home early today!
Standard Chain Link Fence Heights – 4 ft., 5 ft., 6 ft., 7 ft., and 8 ft. (Special heights available upon request)
Slat Length – 3” shorter than the standard chain link fence height
Wind Load and Privacy Factor – Approximately 98% on 2” mesh and approximately 90% on 2 1/4” mesh (Based on wire/mesh used-stretch tension)

SLAT COLORS

These color swatches are only approximations. Please refer to actual color samples for final matching.
—Featherlock chain link fence slats are the consumer’s choice because they are self-locking and the easiest slats to install.
FeatherLock® double-wall slats are the most “user-friendly” slats for chain link fences on the market today. FeatherLock® slats are totally self-locking and do not need a locking device at the top or bottom. Instead, each slat locks in at the top 10” of the fence chain by itself (2” mesh locking width is 1 1/2” and 2 1/4” mesh locking width is 1 11/16”). And, FeatherLock® can be installed faster than any other slat, saving you valuable time and money. This uniquely styled, patented slat can be purchased by the bag or pre-inserted into the chain link wire during the weaving process, depending on your fencing needs. Clean level finish.
GENERAL FEATURES AND SPECIFICATIONS:

Design – Our unique patented design features 10” self-locking sections at the top of each slat which holds it in place without the need for a top or bottom track.
Installation – Insert the narrow end of each slat into the fence vertically. All slats should line up horizontally at the top of the fence. The locking device is the feather portion at the top of the slat.
Standard Chain Link Fence Heights – 4 ft., 5 ft., 6 ft., 7 ft., 8 ft., 10 ft. and 12 ft. (Special heights available upon request)
Slat Length – 1 1/2” shorter than the standard chain link fence height
Wind Load and Privacy Factor – Approximately 80% (Based on wire/mesh used-stretch tension)

SLAT COLORS

These color swatches are only approximations. Please refer to actual color samples for final matching.
Chain link fences are a great option for homeowners and business owners alike because of their durability, ease of installation, and affordability. However, they don’t offer much in the way of privacy. Privacy fencing is important to many homeowners and businesses alike, and that’s where privacy fence slats come in. Our slats can be inserted in an existing chain link fence to provide privacy, as well as add beauty and accentuate the chain link. If you’re looking to save the time and effort of installing vinyl fence slats into an existing fence, we offer pre-installed fence slats as well that come with the slats in the fence mesh, ready to hang and be done with.
We offer a wide variety of slats for chain link fences to meet all of your residential and commercial privacy fencing needs. Our decorative chain link fence products offer a wide range of privacy, as well as different color and style options. We have privacy slats that lock at both the top or the bottom to hold the fence slats securely in place and fit any fence. If you need help choosing the best chain link fence slats for your project, don’t hesitate to give us a call at 1-940-696-0711 and our fence experts would love to help you out.